Hi, looking for a measurement(s) from anyone running a 2014 - 2016 VTX with the "Wakesetter" graphic decal on the side. I have a 2012 and will be doing a logo delete this spring and adding a set of 2014 decals. 

My question is if anyone can provide measurements for vertical spacing from the bottom off the rub rail to the top of either end of the Decal? I would like to get it as close to factory placement as possible. 

Thanks in advance!

18 minutes ago, Cole2001 said:

That sucks! At least it should fall onto the dealers responsibility. That a M or raptor engine?

M5. I hope they take responsibility. 

That sucks! At least it should fall onto the dealers responsibility. That a M or raptor engine?

Welp, got my boat back from the dealer (warranty work) recently and took it out to the lake for the first time this season. Started it up and checked the engine to find water dumping out the exhaust manifold on the starboard side. The freeze plug had popped out which seems to me they did not winterize my boat before the big freeze in January here in North Texas. 
 

My plan is to take it back to them (Tommy’s Lewisville) and have them check the block and the exhaust manifolds. Anything else I should be concerned about here?  Guess I’m wondering my recourse if they didn’t winterize it after all and I have engine damage. 

Ok thanks for the advice.

I found a video of the fumes if that helps.https://youtube.com/shorts/P5dM53fUkE0?si=hYDM9xagVuYgRNiI