Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

  • Recent Posts

    • I ordered my 23LSV with the M6Di with both props. One for the spare and one to play.  That way I have options!

    • Okladadadam

      Posted

      On 5/13/2020 at 9:25 PM, BlindSquirrel said:

      The bad thing is... it’s still in the box in my basement Since 2018. Still trying to find the time to take off and drill out all those rivets and install the new rail. :loser:

      Wanna sell the one you bought?

    • Okladadadam

      Posted (edited)

      I have a closed bow echelon. I have a 12” sub in a small box in the hatch right in front of driver 

      Edited by Okladadadam
    • shawndoggy

      Posted

      the more aggressively you set the wedge, the more it acts like a brake.

    • hawaiianstyln

      Posted

      I'm not even sure how I have never noticed this but starboard side wheels are definitely up in the fender more than I would like.  I thought it was a fender adjustment until I broke out the tape measure and also realized the fender only adjust side to side on my 2008 Boatmate.  In further investigation and taking off front left front right wheels, you can clearly see the starboard side torsion axles have been adjusted up into the fender and the port/left side are adjusted down and away from the fender  (port/left side is the correct adjustment).  Whomever had this boat before me must have adjusted the starboard/right side the wrong way and never realized either.  It's also not visible to me that the boat has a gangsta lean, which is why I never noticed.

      For the life of me and 2 years supply of PB drenched all over, I can't get this spline to budge.  I followed a boatmate torsion adjustment video and I tried to open the C clamp over the spline with a metal wedge to loosen the metal, but maybe the male geared spline goes over a female spline and I have to remove the entire thing, then adjust?

      starboard/right side  (low side) and pic of angle

      right.thumb.jpg.c572fc99afaf2fc1bd1d7b1399b88835.jpgright2.thumb.jpg.17eb3ffce4d0892b519aeb64bc3ef0ed.jpg

       

       

      Port/Left side (good side - correct height) and angle

      left.thumb.jpg.f907ae05bb8b818999a33acbda0d55d8.jpgleft2.thumb.jpg.0bfd91a07761bcd4d9c32c570647cb22.jpg

  • Who's Online   54 Members, 0 Anonymous, 255 Guests (See full list)

    • hockeyman
    • Ronnie
    • oldjeep
    • skier88
    • MW05
    • kdspindl
    • WakeGirl
    • hunter77ah
    • BLSousa
    • Eagleboy99
    • formulaben
    • Sparky450
    • Scotters12
    • Michigan boarder
    • Swooper
    • Leftlane
    • Jdmjr88
    • t a
    • Busman020
    • Pilotguy
    • dlb
    • burider
    • MurrayinMontreal
    • bamaboy
    • lloydcarr
    • FXR700
    • robtr8
    • achimbos
    • potterm
    • Okladadadam
    • ahopkinsVTX
    • jjackkrash
    • Clean66
    • hacktt10
    • Sixball
    • Dieselnutz
    • tbullard
    • SkiSam
    • PHC
    • lonestar
    • tlonas
    • Setter23
    • Rednucleus
    • pmm009
    • Marjac23
    • IXFE
    • Grooobz
    • braindamage
    • Linden
    • NorCalDaggz
    • wr222
    • BaBaLoO
    • DAI
    • BJM

  • General Statistics

    50,263
    Total Topics
    788,291
    Total Posts
    33,381
    Total Members
    8,865
    Most Online
    MW05
    Newest Member
    MW05
    Joined 05/28/2020 06:14 PM
×
×
  • Create New...