Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

  • Recent Posts

    • John I.

      Posted (edited)

      What would the purchase of a Malibu from Tommy's look like right now? Presumably, the boat could be located at any of Tommy's 15-16 locations. Would the buyer be dealing directly with an individual from M&T bank? Seems unlikely, but I don't know, hence the question. Would there be a boat sales person / broker involved? Does Malibu corporate have any say in the disposition of Tommy's inventory? 

      I have purchased foreclosed real estate before and there was still a real estate agent representing the bank/owner. And in the late 90's I almost purchased a Nautique from a dealer in the pacific northwest (I am in SoCal) that lost their dealership arrangement with Correct Craft and was looking to unload the last 8-10 boats they had in inventory in advance of that effective date. The dealer provided me with their invoice and supporting details of their floor financing as assurance that the prices were rock bottom. But that dealer was not in default with their lender. 

      Just curious.

      Edited by John I.
    • That said, I'm like Woodski, pulling a boat motor is very easy (nothing complicated) if you have access to something to lift it safely.  Pulling it would let you change both the timing cover and oil pan gasket and give you a much higher chance of a leak free result.  

      When I dropped the new engine in the Sunsetter my picture of the engine hanging on the chain and the next photo of it in the boat mounted with the exhaust, throttle, and driveshaft coupling alignment left to do is 14 minutes apart.  

    • Yeah, if its the timing cover gasket I would certainly try it myself in the boat.  You are right, a SBC, the timing cover should go on first, then the oil pan gasket mating surface is actually on the timing cover gasket groove.  

      Check out YouTube, there are some creative fellas out there that have done it.  The tough part is the room you'll have between the transom and the front of the motor.

       

       

    • On 8/14/2019 at 1:54 AM, wakefrankNL said:

      Junior (8 yes old) taling in his forst ever faceplant. Had a slicht herdacht, but got up, shook it off and rode again.. 

      F86DD835-016F-49E2-8CF0-C547BD45531E.png

      A2B45B67-149B-44A2-8335-055F55CAE44D.png

      3B41DFA5-4264-42C2-B7EB-BE671E6FB3FA.png

      Ouf... riding a board that -looks- too big for him. looks to be about 10? Did that to my cousin 15 years ago. took the board edge to the head after loading the line to a air backroll. 7 staples. Ride the right size board!

    • 40 minutes ago, Hemmy said:

      Most car dealers want your service more than the sell of the car.  They make more money on service than sales.  Can't imagine a boat would be any different.

      I don't think it is an issue of whether a dealer would service a Malibu that was bought elsewhere -- it is how the jobs are prioritized when it's July 3 and everybody wants their boat fixed ASAP.

  • Who's Online   40 Members, 0 Anonymous, 236 Guests (See full list)

    • pdneuman
    • John I.
    • 4skinuts
    • footndale
    • bretcole
    • Ronnie
    • Nick55
    • MLars
    • DAI
    • pihlstrom
    • dshack
    • oldjeep
    • mxmark4
    • cowwboy
    • skijcsports
    • TomH
    • Hamboats
    • Hemmy
    • Txstoj
    • JeffK
    • dalt1
    • Brandonloos21
    • krafty
    • hunter77ah
    • BlindSquirrel
    • AJwakedevil
    • smuurph84
    • REHinH20
    • 85 Barefoot
    • willw
    • EchelonMike
    • WaterBoy67
    • KeepingupwiththeJones
    • ndahlberg12
    • SWH
    • shawndoggy
    • DRB10SEVEN
    • justgary
    • dizzygti
    • Ramdni

  • Member Statistics

    42,267
    Total Members
    8,865
    Most Online
    KKS
    Newest Member
    KKS
    Joined
×
×
  • Create New...